Available across Bangalore
Post-Construction Deep Cleaning Services in Bangalore
Free quoteOne to two days depending on built area and residue4 to 8 trained cleaners with a supervisor
Quoted after photos or a quick site visit
Cement, grout haze and fine building dust removed so a new structure becomes a liveable home.
Real job photoOn site: window glass cleaned after construction
Overview
About our post-construction cleaning service
When builders leave, a new house looks finished but is far from liveable. Cement and mortar splashes sit on floors and window frames, a thin grey haze of grout covers every tile, and fine construction dust has settled inside switchboards, sills and tracks. Ordinary mopping only turns this dust into a muddy film. Post-construction deep cleaning needs a different set of tools and a different order of work.
We start with dry removal: scraping hardened cement with blades held at a safe angle, then vacuuming the fine dust with machines built for it. Only after that do we use liquids, choosing grout-haze removers that suit your specific tiles. This prevents scratches on new flooring and avoids the streaky finish that comes from wetting construction dust too early.
Who books post-construction cleaning
- Owners taking handover of a newly built independent house
- Homes after civil renovation like new flooring or bathroom rebuilds
- Builders and contractors needing a ready-to-show finish
- Commercial spaces converted into residences
Checklist
What is included in post-construction cleaning
Every item below is part of the standard post-construction cleaning visit, with nothing added to the bill unless you ask for it.
- Cement and mortar splashes scraped off floors, sills and frames
- Grout haze removed from floor and wall tiles
- Fine construction dust vacuumed from every surface and gap
- Window frames, sliding tracks and glass cleared of residue
- Sanitaryware and CP fittings cleaned of cement and stickers
- Switchboards, sockets and electrical points dusted dry
- Loose debris bagged and kept ready for disposal
- Final wet clean and machine scrub of all floors
Method
How we carry out post-construction cleaning
Site inspection
We check floor types, the level of cement residue and whether water and electricity are available on site.
Dry debris removal
Loose debris is bagged and heavy dust is vacuumed before any water is used.
Scraping and residue removal
Hardened cement is scraped at a safe angle; grout haze is treated with a remover matched to the tile.
Fixtures and glass
Windows, fittings and sanitaryware are cleaned of splashes, labels and protective tapes.
Wet finish
Floors and walls are washed and machine-scrubbed until no grey film comes off on a white cloth.
Good to know
Why construction dust needs special handling
Construction dust contains very fine cement and silica particles. Wiping it with a wet cloth creates a slurry that dries as a film, and sweeping it puts it straight back into the air. We vacuum first with machines rated for fine dust and keep crew in masks throughout.
Grout haze is the cloudy layer left when tile joints are filled. It cannot be mopped away, but harsh acids can damage some tiles and coloured grout. We test a small area first and choose the gentlest remover that works.
Post-Construction cleaning across Bangalore
Our post-construction crews are often on new builds in Hennur, Thanisandra, Kengeri, RR Nagar and Begur, and on house rebuilds in older areas like Banashankari and Hanumanthanagar.
FAQ
Questions about post-construction cleaning
Payment, rescheduling and safety answers that apply to post-construction cleaning as well as our other services are in the general FAQ.
When should post-construction cleaning be done?
After all civil, electrical, plumbing and carpentry work is complete, and before furniture is moved in. Cleaning earlier means doing it twice.
Can you remove cement stains from tiles and granite?
Yes. We scrape hardened cement carefully and use residue removers suitable for the surface. Very old or deeply set stains may only lighten.
Do you take away construction debris?
We bag the fine and loose debris generated during cleaning. Removal of large construction waste like broken tiles or rubble needs separate arrangement.
Is water and power needed on site?
Yes. Our machines need a power point and we need running water for the final wash. Please tell us if either is limited.
Our promise
- A clear scope and price before we start
- You inspect the work before you pay
- Missed a spot? We return within 24 hours
- Machines and materials included
Related
Often booked with post-construction cleaning
Book post-construction cleaning in Bangalore
Share your home size and area on a call or WhatsApp and get a clear quote for post-construction cleaning.